link
Hermak - Cut-to-length Lines, Slitting Lines, Roll Forming Lines

Cut-to-Length Lines

Slitting Lines

Roll Forming for Corrugated Sheets

Roll Forming





CAPABILITY RANGES OF OUR SLITTING LINES

Entry Material

  • Cold rolled, hot rolled, galvanized, stainless, prepainted steels
  • Strip width from 500 mm up to 2500 mm
  • Strip thickness from 0.30 mm up to 12 mm
  • Coil weight up to 35 T

Product at Exit

  • Weight of the wound coil up to 30 T

Speed

  • Up to 250 m/min

GENERAL COMPOSITION OF OUR SLITTING LINES

1. Entrance Coil Car

  • V type - operates in canal
  • L type - operates over ground
  • Scissors type - operates over ground

2. Uncoiler

  • Single mandrel uncoiler
  • Uncoiler with double mandrel with different diameter steps for heavy coils

3. Peeler & Pinch Roll Assembly

4. Prestraightener Assembly

  • In thick materials

5. Slitter

  • Standart model
  • Model with automatic knife changing unit

6. Machine for Scraps

  • Scrap baller type
  • Scrap winder type
  • Scrap cutter type

7. Pit Table

8. Tension Unit

  • Pad type
  • Pad and roll type

9. Recoiler & Seperator Assembly

10. Exit Coil Car

  • V type, operates in canal
  • L type, operates over ground
  • Scissors type, operates over ground

11. Turnstile

  • Double armed turnstile
  • Four armed turnstile
Hermak Mekatronik Mühendisliği ve Makine San. Tic. A.Ş., İstanbul/TÜRKİYE Tel: +90 (216) 307 0444 E-mail: info@hermak.com.tr