Cut-to-Length Lines
Capability Ranges of Our Cut to Length Lines
Entry Material
- Cold rolled,hot rolled,galvanized,stainless,prepainted steels
- Strip width,from 500 mm up to 2500 mm
- Strip thickness,from 0.30 mm up to 12 mm
- Coil weight,up to 35 T
Product at Exit
- Blank length,from 300 mm up to 12 m
- Weight of the pile,up to 20 T
Speed
- Up to 100 m/min with rotary shear system.This system is convenient for material thicknesses up to 3 mm
- Up to 70 m/min with roll feeder system.This system is convenient for material thicknesses up to 3 mm
- Up to 45 m/min with flying shear system.This system is convenient for material thicknesses up to 6 mm
- Up to 20 m/min with flying shear system.This system is convenient for material thicknesses up to 12 mm
General Composition of Our Cut to Length Lines
1-Enterance Coil Car
- V type,operates in canal
- L type, operates over ground
- Scissors type,operates over ground
2–Uncoiler
- Single mandrel uncoiler
- Uncoiler with double mandrel with different diameter steps for heavy coils
3-Peeler & Pinch Roll Assembly
4-Prestraightener Assembly
- In thick materials
5-Straightener
- 4 high leveller
- 6 high leveller
6-Pit Table
7-System of Length Cutting
- Roll feed and shear
- Rotary shear
- Flying shear
- Roll feed and flying shear combination (for lines,where thin gauge and thick gauge materials are produced together)
8-Stacking System & Line Exit Conveyor
- Fully automatic stacker with hydraulic or secrew-jack mechanism lifting
- Fully automatic stacker for materials having sensitive surfaces with hydraulic or jack-screw mechanism lifting
